iPhone Repair for Water Damage: How to Save Your Phone
10 Best Ways on iphone repairs water damage – If your iPhone is wet, it’s important to get it checked out as soon as possible by an expert. Even if the phone seems to be working normally, water damage can cause major problems down the line including deterioration of the hardware, loss of data, and destruction of your device.
If your iPhone displays a different color for the SIM card slot when it is wet, there is a good chance that water has damaged the phone and you should take it to a repair shop. When inspecting an iPhone for water damage, look for the following signs:
- The screen might be cracked or blurry.
- The phone might have taken on a green or yellow hue.
- There might be water droplets all over the inside of the device.
If you’re in a bind and don’t have access to a Mac or another iOS device, here are some tips on how to save your iPhone from water damage.
Read: How to repair iPod Touch from Water Damage
How to Fix a Water Damaged Iphone That Won’t Turn On
- Turn off your iPhone. You don’t want any water to get inside your device. To do this, turn it off by holding the power button for 5 seconds until the screen turns off. Then, wait 10 minutes before turning it back on again.
- Remove your battery. This will prevent moisture from getting into the battery itself. You can remove the battery by removing the two screws at the bottom of the phone. The battery is located next to the speaker on the left side of the phone. Once you’ve removed the battery, press the Sleep/Wake button for 10 minutes. If you haven’t done so already, you’ll need to charge the battery before putting it back in place.
- Use a dry cloth. A clean, dry cloth will help to remove any moisture from the device. You can use a soft towel or microfiber cloth.
- Use a hair dryer. If your iPhone is wet and has water damage, you can try to dry it out using a hair dryer. This will help remove any excess water and stop the phone from overheating. If the phone is beyond saving, you can take it to a service center to be repaired.
- Use a Big Bowl of uncooked rice to absorb moisture. The first thing to do is to take the device apart and dry everything off as best you can. If the water was contained within the phone itself, try pouring a bowl of uncooked rice over the device and let it sit for about 48 hours. This will act as a natural desiccant and absorb the moisture.
- Use an Antique Dryer. If you have an old dryer, this could be a great way to dry out your iPhone. Plug it in and turn on the dryer for about 20 minutes. The heat from the dryer should be enough to remove excess water and prevent your iPhone from overheating.
- Use Coffee Grounds to Remove Excess Moisture From Your iPhone. If you don’t have a dryer or a hair dryer, you can use coffee grounds instead. Simply place your phone in the bottom of a glass jar or container, and fill it up with coffee grounds. Let it sit there for 24 hours, and then put it in the freezer overnight. The coffee grounds will absorb all of the moisture from your phone. Take it out of the freezer the next day, and let it sit in a warm room for another 24 hours. After that, take it out and put it in the sun to dry out for about an hour.
- Use a Paper Towel to Dry Out Your iPhone. If you are unable to find a dryer, or if you don’t want to use coffee grounds, you can simply use a paper towel to dry your phone. Simply place it in the microwave for 30 seconds, and then let it sit for another 30 seconds. Repeat this process until all of the excess moisture is removed from your iPhone.
- Use a Blow-Dryer. A blow-dryer is a great way to dry out your iPhone. It will help remove any excess moisture from the device. You will need to make sure that your iPhone is placed on a clean towel or other material. Turn on the blow-dryer and heat it up to high. Once it reaches a certain temperature, set your iPhone on the towel, and leave it there for about 10 minutes. Take it out, and then let it cool down for another 5 minutes.
- Use Apple’s iSleek iPhone Cleaning Kit. If you are unable to remove the excess moisture from your iPhone, you can use Apple’s iPhone cleaning kit. Simply follow the instructions on the back of the kit, and then dry your iPhone in the sun for about an hour.
In conclusion, there are many ways to fix a wet iPhone. However, the best way to ensure that your iphone is fixed properly and that all the water is removed is to take it to an authorized Apple technician. If you do not have an Apple store near you, there are many other reputable repair stores that can help you get your iphone dried and fixed quickly. So, if your iphone has been damaged by water, don’t panic! There are plenty of solutions available to you.